Table of Contents
Advertisement
Quick Start Guide
Hardware Overview
CONNECTORS
SIM / LED / Reset
Gigabit LAN(PoE)
LED Description:
LED
1
Power
2
LAN(PoE)
3
Internet
3G/4G-LTE
(Received
Signal
4
Strength
Indicator)
4
1 2 3
Insert the SIM card into the SIM slot.
Press the reset button to reset device or restore to factory default settings.
Connect with the supplied PoE injector, 802.3at compliant, using an Ethernet
cable.
STATUS
Orange
System is either in initial startup phase or has boot failure
Green
System is up and ready
Off
No input power
Green
Transmission speed is at Gigabit speed (1000Mbps)
Orange
Transmission speed is at 10/100Mbps
Blinking
Data being transmitted/received
Off
No device is being connected
Green
IP connected and traffic is passing thru the device
Orange
IP request failed or System is in initial booting phase
Green
RSSI greater than -69 dBm. Excellent signal condition
Green
RSSI from -81 to -69 dBm. Good signal condition
Flashing quickly
Orange
RSSI from -99 to -81 dBm. Fair signal condition.
Flashing quickly
Orange
RSSI less than -99 dBm. Poor signal condition.
Flashing slowly
Orange
No signal. 4G_LTE module is still in connected mode
Off
No LTE module or LTE module fails
DESCRIPTION
DESCRIPTION
2
Advertisement
Table of Contents
