Hardware Overview - Billion BiPAC 7404V Series Quick Start Manual

Hardware Overview

The Front LEDs
Lit when power is ON
Lit when the
system is ready
The Rear Ports
Connect the
detachable antenna
Connect the supplied
RJ-11 cable to this port
when connecting to the
ADSL/telephone
network
All manuals and user guides at all-guides.com
BiPAC 7404VP does not support 802.11g
Lit when connected to an
Ethernet device.
Green for 100Mbps;
Orange for 10Mbps.
Blinking when data is
Transmitted / Received
Lit green when the
wireless connection is
established.
Flashes when sending /
receiving data
Connect RJ-11 cable
to this port when
connecting to the
telephone wall jack
Connect RJ-11 cable
to this port when
connecting to an
analog phone set
Lit Green when successfully
connected to an ADSL DSLAM,
("line synch").
Lit Orange when there is a PPPoA
/ PPPoE connection
Lit green when the
phone is off-hook
Lit when the inbound
and outbound calls
transmitted through
PSTN
Connect your computer
to a LAN port, using the
included Ethernet cable
Press it to reset
the device or
restore to factory
default settings
Quick Start Guide
Lit when the SIP
Registration is OK.
Green for Phone 1;
Orange for Phone 2
Connect the
supplied power
adapter to this jack
Power
ON/OFF
switch
2