Key Expansion Module Buttons And Hardware - Cisco 8841 User Manual

Key Expansion Module Buttons and Hardware

Figure 11.
The following table describes the features of the key expansion module.
LCD screen—Displays the phone number, speed-dial number (or name or other
text label), phone service, or phone feature assigned to each button.
Icons that indicate line status resemble (in both appearance and function) the icons
on the phone to which the key expansion module is attached.
1 Lighted buttons—Line buttons. Each button or pair of buttons corresponds to one
line. The lights beneath each button indicate the state of the corresponding line as
follows:
•
light off—Button is not configured.
•
green steady LED—Line is configured correctly is in idle state.
•
red steady LED—Line in use and have an active call on it.
•
amber steady/blinking LED—A configuration error occurred when this feature
was being set up.
2 Shift buttons—2 buttons. The button for page 1 is labeled as 1 and the button for
page 2 is labeled as 2. The lights in each button indicate the state of the page as
follows:
•
green steady LED—Page is in view.
•
light off—Page is not in view.
•
amber steady LED—Page is not in view with one or more alerting calls on
the page.
Cisco IP Phone 8841/8851 Multiplatform Phones User Guide
Cisco IP Phone KEM (Dual LCD)
Wireless Headsets
79