Chrysler Concorde 2004 Service Manual page 2661

LH
INPUT CLUTCH ASSEMBLY (Continued)
(24) Install OD reaction plate flat snap ring (Fig.
313).
Fig. 313 Install Flat Snap Ring
1 - ARBOR PRESS RAM
2 - TOOL 5059A
3 - FLAT SNAP RING
(25) Measure OD clutch pack clearance. Set up
dial indicator on top of the OD/Reverse reaction plate
as shown in (Fig. 314).
Fig. 314 Measure OD Clutch Pack Clearance
1 - DIAL INDICATOR
2 - OD/REVERSE PRESSURE PLATE
(26) Zero dial indicator and apply 30 psi (206 kPa)
air pressure to the overdrive clutch hose on Tool
8391. Measure and record OD clutch pack measure-
ment in four (4) places, 90° apart.
(27) Take average of four measurements and com-
pare with OD clutch pack clearance specification.
The overdrive (OD) clutch pack clearance is
1.07-3.25 mm (0.042-0.128 in.).
If not within specifications, the clutch is not
assembled properly. There is no adjustment for the
OD clutch clearance.
(28) Install reverse clutch pack (two fibers/one
steel) (Fig. 315).
Fig. 315 Install Reverse Clutch Pack
1 - REVERSE CLUTCH PLATE
2 - REVERSE CLUTCH DISCS
(29) Install reverse clutch reaction plate with the
flat side down towards reverse clutch (Fig. 316).
Fig. 316 Install Reaction Plate
1 - REVERSE CLUTCH REACTION PLATE (FLAT SIDE DOWN)
TRANSAXLE 21 - 119