Assembly - Chrysler Concorde 2004 Service Manual

Hide thumbs Also See for Concorde 2004:

Table of Contents

VALVE BODY (Continued)

(17) Remove valves and springs as shown in (Fig.

(18) Cleanliness through entire disassembly and

assembly of the valve body cannot be overempha-

sized. When disassembling, each part should be

washed in a suitable solvent, then dried by com-

pressed air. Do not wipe parts with shop towels.

All mating surfaces in the valve body are accurately

machined; therefore, careful handling of all parts

must be exercised to avoid nicks or burrs.

ASSEMBLY

NOTE: If the valve body assembly is being recondi-

tioned or replaced, it is necessary to perform the

Quick Learn Procedure using the DRBIII

Tool. (Refer to 8 - ELECTRICAL/ELECTRONIC CON-

TROL MODULES/POWERTRAIN CONTROL MODULE

- STANDARD PROCEDURE)

1 - VALVE BODY

2 - T/C REGULATOR VALVE

3 - L/R SWITCH VALVE

4 - CONVERTER CLUTCH CONTROL VALVE

(1) Install valves and springs as shown in (Fig.

(2) Install regulator valve spring retainer (Fig.

(3) Install dual retainer plate using Tool 6301 (Fig.

Fig. 431 Valve Body Assembly

5 - MANUAL VALVE

6 - CONVERTER CLUTCH SWITCH VALVE

7 - SOLENOID SWITCH VALVE

8 - REGULATOR VALVE

Table of Contents

300m 2004 Intrepid 2004