Operation; Disassembly - Chrysler Concorde 2004 Service Manual

Hide thumbs Also See for Concorde 2004:

Table of Contents

FINAL DRIVE (Continued)

OPERATION

The differential assembly is driven by the transfer

shaft by way of the differential ring gear. The ring

gear drives the differential case, and the case drives

the driveshafts through the differential gears. The

differential pinion and side gears are supported in

the case by thrust washers and a pinion shaft. Dif-

ferential pinion and side gears make it possible for

front tires to rotate at different speeds while corner-

The valve body and solenoid wiring connector must

be removed from the transaxle in order to service the

transaxle differential. The transfer shaft cannot be

removed with the valve body in place. Remove the

valve body assembly from the transaxle. (Refer to 21

TRANSMISSION/TRANSAXLE/AUTOMATIC

42LE/VALVE BODY - REMOVAL)

(1) Remove transfer chain cover (Fig. 156).

Fig. 156 Remove Chain Cover

1 - TRANSAXLE CASE

2 - CHAIN COVER

(2) Remove chain oiler (Fig. 157).

Fig. 157 Remove Chain Oiler

1 - CHAIN SNUBBER

2 - CHAIN OILER

(3) Remove chain snubber (Fig. 158).

Fig. 158 Remove Chain Snubber

1 - CHAIN SNUBBER

Table of Contents

300m 2004 Intrepid 2004