Windows; Power Window Controls - Chrysler 300 SRT 2019 Owner's Manual

Table of Contents

Advertisement

crease the front blower speed. Do not use the
Recirculation mode without A/C for long periods,
as fogging may occur.
CAUTION!
Failure to follow these cautions can cause
damage to the heating elements:
• Use care when washing the inside of the
rear window. Do not use abrasive window
cleaners on the interior surface of the
window. Use a soft cloth and a mild wash-
ing solution, wiping parallel to the heating
elements. Labels can be peeled off after
soaking with warm water.
• Do not use scrapers, sharp instruments, or
abrasive window cleaners on the interior
surface of the window.
• Keep all objects a safe distance from the
window.
Outside Air Intake
Make sure the air intake, located directly in front
of the windshield, is free of obstructions, such as
leaves. Leaves collected in the air intake may
reduce airflow, and if they enter the plenum,
they could plug the water drains. In Winter
months, make sure the air intake is clear of ice,
slush, and snow.
54
Cabin Air Filter
The climate control system filters out dust and
pollen from the air. Contact an authorized dealer
to service your cabin air filter, and to have it
replaced when needed.
Operating Tips Chart

WINDOWS

Power Window Controls

The window controls on the driver's door control
all the door windows.
Power Window Switches
There are single window controls on each pas-
senger door trim panel, which operate the pas-
senger door windows. The window controls will
operate only when the ignition is in the ACC or
ON/RUN position.
NOTE:
For vehicles equipped with the Uconnect sys-
tem, the power window switches will remain
active for up to ten minutes after the ignition is
placed in the OFF position. Opening either front
door will cancel this feature. The time is pro-
grammable. Refer to "Uconnect Settings" in
"Multimedia" for further information.

Advertisement

Table of Contents
loading

Table of Contents