Chassis - Chrysler 300 SRT 2019 Owner's Manual

CAUTION!
• Mixing of engine coolant (antifreeze) other
than specified Organic Additive Technology
(OAT) engine coolant (antifreeze), may re-
sult in engine damage and may decrease
corrosion protection. Organic Additive
Technology (OAT) engine coolant is differ-
ent and should not be mixed with Hybrid
Organic Additive Technology (HOAT) en-
gine coolant (antifreeze) or any "globally
compatible" coolant (antifreeze). If a non-
OAT engine coolant (antifreeze) is intro-
duced into the cooling system in an emer-
gency, the cooling system will need to be
drained, flushed, and refilled with fresh
OAT coolant (conforming to MS.90032), by
an authorized dealer as soon as possible.

Chassis

Component
Automatic Transmission
Brake Master Cylinder
Rear Axle
CAUTION! (Continued)
• Do not use water alone or alcohol-based
engine coolant (antifreeze) products. Do
not use additional rust inhibitors or antirust
products, as they may not be compatible
with the radiator engine coolant and may
plug the radiator.
• This vehicle has not been designed for use
with propylene glycol-based engine cool-
ant (antifreeze). Use of propylene glycol-
based engine coolant (antifreeze) is not
recommended.
(Continued)
Fluid, Lubricant, or Genuine Part
Use only Mopar ZF 8&9 Speed ATF Automatic Transmission Fluid, or equivalent. Failure to use the
correct fluid may affect the function or performance of your transmission.
We recommend you use Mopar DOT 3 brake fluid. If DOT 3 brake fluid is not available, then DOT
4 is acceptable.
DOT 4 brake fluid must be changed every 24 months. This interval is time based only, mileage
intervals do not apply.
We recommend you use Mopar LSD Synthetic Gear Lubricant SAE 75W85 (API GL-5).
235