Chrysler 300 SRT 2019 Owner's Manual page 75

Table of Contents

Advertisement

1. Upper Left
• Compass (default)
• Outside Temp.
• Time
• Range to Empty
• Average (MPG, L/100 km, or km/L)
• Current (MPG, L/100 km, or km/L)
• Trip A Distance
• Trip B Distance
• None
2. Upper Right
• Compass
• Outside Temp (default)
• Time
• Range to Empty
• Average (MPG, L/100 km, or km/L)
• Current (MPG, L/100 km, or km/L)
• Trip A Distance
• Trip B Distance
• None
3. Center
• Menu Title (default)
• Compass
• Outside Temp.
• Time
• Range to Empty
74
• Average (MPG, L/100 km, or km/L)
• Current (MPG, L/100 km, or km/L)
• Trip A Distance
• Trip B Distance
• Audio Information
• Digital Speed
• None
4. Current Gear
• On
• Off (default)
5. Odometer
• Show (default)
• Hide
6. Fuel Gauge
• Standard (default)
• Detailed
7. Restore Default
• Ok
• Cancel
Diagnostics
This feature allows the driver to view engine and
emission vehicle faults.
• Push OK to have the most recent fault code
sent.
• There is a delay when the next diagnostic
code is requested during which the following
message is displayed:
• "Checking System for Diagnostic Codes."
• Driver must push the OK button again to see
the next Pcode otherwise current message
remains displayed.
• Driver exits when they cycle to another sub-
menu (up or down).
• Faults are displayed from newest to the
oldest.
• If the menu is exited before the end of codes
is reached - when the driver re-enters the list
will be restarted from the beginning.
• When no codes are present or the last code is
reached = (P0000) and this message is dis-
played:
• "No or End of Diagnostic Codes."
Speed Warning
Push and release the up or down arrow button
until the Speed Warning Menu icon/title is dis-
played in the instrument cluster display. Push
and release OK to enter speed warning. Use the
up or down arrow button to select a desired
speed, then push and release OK to set the
speed. The white passive speed limiter telltale
will light up with a notification text message
(Speed Warning Set to XX, followed by the
selected unit). When the set speed is just ex-
ceeded, a single chime will sound with a pop up
message of "Speed Warning Exceeded". If the
set speed is exceeded by 1.5 mph (3 km/h), an
audible chime will sound for up to 10 seconds or
until the speed is no longer exceeded. The white

Advertisement

Table of Contents
loading

Table of Contents