Chrysler 300 SRT 2019 Owner's Manual page 212

Wiper Blade Removal/Installation
CAUTION!
Do not allow the wiper arm to spring back
against the glass without the wiper blade in
place or the glass may be damaged.
1. Lift the wiper arm to raise the wiper blade off
of the glass, until the wiper arm is in the full
up position.
Windshield Wiper Arm
1 — Wiper
2 — Locking Tab
3 — Wiper Arm
2. To disengage the wiper blade from the wiper
arm, flip up the locking tab.
Wiper Locking Assembly
1 — Wiper
2 — Locking Tab
3 — Wiper Arm
3. Slide the wiper blade down towards the base
of the wiper arm.
4. With the wiper blade disengaged, remove
the wiper blade from the wiper arm by hold-
ing the wiper arm with one hand and sepa-
rating the wiper blade from the wiper arm
with the other hand (move the wiper blade
down toward the base of the wiper arm and
away from the J hook in the end of the wiper
arm).
Removing Wiper From Wiper Arm
1 — Wiper
2 — Locking Tab
3 — Wiper Arm J Hook
5. Gently lower the wiper arm onto the glass.
Installing The Front Wipers
1. Lift the wiper arm off of the glass, until the
wiper arm is in the full up position.
2. Position the wiper blade under the hook on
the tip of the wiper arm with the wiper locking
tab open.
3. Insert the receiver bracket on the wiper as-
sembly into the hook on the tip of the arm
through the opening in the wiper blade under
the locking tab.
211