Table of Contents
Advertisement
NOTE:
When the vehicle transitions from a location with
left hand drive traffic to a location with right hand
drive traffic or vice-versa, the ACC system will
automatically detect the direction of traffic.
ACC Operation At Stop
If the ACC system brings your vehicle to a
standstill while following a target vehicle, if the
target vehicle starts moving within two seconds
of your vehicle coming to a standstill, your
vehicle will resume motion without the need for
any driver action.
If the target vehicle does not start moving within
two seconds of your vehicle coming to a stand-
still, the ACC with Stop system will cancel and
the brakes will release. A cancel message will
display on the instrument cluster display and
produce a warning chime. Driver intervention
will be required at this moment.
While ACC with Stop is holding your vehicle at a
standstill, if the driver seatbelt is unbuckled or
the driver door is opened, the ACC with Stop
system will cancel and the brakes will release. A
cancel message will display on the instrument
cluster display and produce a warning chime.
Driver intervention will be required at this mo-
ment.
WARNING!
When the ACC system is resumed, the driver
must ensure that there are no pedestrians,
vehicles or objects in the path of the vehicle.
Failure to follow these warnings can result in
a collision and death or serious personal
injury.
Adaptive Cruise Control (ACC) Menu
The instrument cluster display will show the
current ACC system settings. The instrument
cluster display is located in the center of the
instrument cluster. The information it displays
depends on ACC system status.
Push the Adaptive Cruise Control (ACC) on/off
button (located on the steering wheel) until one
of the following appears in the instrument cluster
display:
Adaptive Cruise Control Off
When ACC is deactivated, the display will read
"Adaptive Cruise Control Off."
Adaptive Cruise Control Ready
When ACC is activated, but the vehicle speed
setting has not been selected, the display will
read "Adaptive Cruise Control Ready."
Adaptive Cruise Control Set
When the SET (+) or the SET (-) button (located
on the steering wheel) is pushed, the display will
read "ACC SET."
When ACC is set, the set speed will show in the
instrument cluster display.
The ACC screen may display once again if any
ACC activity occurs, which may include any of
the following:
• System Cancel
• Driver Override
• System Off
• ACC Proximity Warning
• ACC Unavailable Warning
• The instrument cluster display will return to
the last display selected after five seconds of
no ACC display activity
Display Warnings And Maintenance
"Wipe Front Radar Sensor In Front Of
Vehicle" Warning
The "ACC/FCW Unavailable Wipe Front Radar
Sensor" warning will display and also a chime
will indicate when conditions temporarily limit
system performance.
This most often occurs at times of poor visibility,
such as in snow or heavy rain. The ACC system
may also become temporarily blinded due to
obstructions, such as mud, dirt or ice. In these
cases, the instrument cluster display will display
"ACC/FCW Unavailable Wipe Front Radar Sen-
sor" and the system will deactivate.
The "ACC/FCW Unavailable Wipe Front Radar
Sensor" message can sometimes be displayed
153
Advertisement
Chapters
Table of Contents
