Illuminated Vanity Mirrors - If Equipped; Exterior Lights; Multifunction Lever; Headlight Switch - Chrysler 300 SRT 2019 Owner's Manual

Table of Contents

Advertisement

Refer to "Uconnect Settings" in "Multimedia" for
further information.
Illuminated Vanity Mirrors — If
Equipped
An illuminated vanity mirror is located on the sun
visor. To use the mirror, rotate the sun visor
downward and swing the mirror cover upward.
The light turns on automatically. Closing the
mirror cover turns off the light.
Illuminated Vanity Mirror
"Slide-On-Rod" And Extender Features Of
Sun Visor
To use the "Slide-On-Rod" feature of the sun
visor, rotate the sun visor downward and swing
the sun visor so it is parallel to the side window,
grab the sun visor and pull rearwards until the
sun visor is in the desired position. To use the
extender feature of the sun visor, grab the
extender which is located at the rear of the visor
and pull rearward.
Slide-On-Rod Feature

EXTERIOR LIGHTS

Multifunction Lever

The multifunction lever controls the operation of
the turn signals, headlight beam selection and
passing lights. The multifunction lever is located
on the left side of the steering column.
Multifunction Lever

Headlight Switch

The headlight switch is located on the left side of
the instrument panel. This switch controls the
operation of the headlights, parking lights, in-
strument panel lights, interior lights and fog
lights.
Headlight Switch
From the O (off) position, rotate the headlight
switch clockwise to the first detent for parking
light and instrument panel light operation. Ro-
tate the headlight switch to the second detent for
headlight, parking light and instrument panel
light operation.

Daytime Running Lights (DRL)

The LED Daytime Running Lights will come on
when the engine starts, headlights are off, and
the parking brake is off. The headlights must be
used for normal nighttime driving.
41

Advertisement

Table of Contents
loading

Table of Contents