Chrysler 300 SRT 2019 Owner's Manual page 119

Lower Anchors And Tethers For CHildren
(LATCH) Restraint System
LATCH Label
Your vehicle is equipped with the child restraint
anchorage system called LATCH, which stands
for Lower Anchors and Tethers for CHildren. The
LATCH system has three vehicle anchor points
for installing LATCH-equipped child seats.
There are two lower anchorages located at the
back of the seat cushion where it meets the
seatback and one top tether anchorage located
behind the seating position. These anchorages
are used to install LATCH-equipped child seats
without using the vehicle's seat belts. Some
seating positions may have a top tether anchor-
What is the weight limit (child's weight + weight
of the child restraint) for using the LATCH an-
chorage system to attach the child restraint?
118
age but no lower anchorages. In these seating
positions, the seat belt must be used with the
top tether anchorage to install the child restraint.
Please see the following table for more
information.
LATCH Positions For Installing Child
Restraints In This Vehicle
LATCH Positions For Installing Child
Restraints In This Vehicle
Lower Anchorage Symbol (2 Anchorages Per
Seating Position)
Top Tether Anchorage Symbol
Frequently Asked Questions About Installing Child Restraints With LATCH
65 lbs (29.5 kg)
Use the LATCH anchorage system until the
combined weight of the child and the child re-
straint is 65 lbs (29.5 kg). Use the seat belt and
tether anchor instead of the LATCH system
once the combined weight is more than
65 lbs (29.5 kg).