UCONNECT VOICE
RECOGNITION QUICK TIPS
Introducing Uconnect
Start using Uconnect Voice Recognition with
these helpful quick tips. It provides the key Voice
Commands and tips you need to know to control
your Uconnect system.
Uconnect 4C NAV
NOTE:
If you see the NAV icon on the bottom bar, or in
the Apps menus, of your touchscreen, you have
the Uconnect 4C NAV system. If not, you have a
Uconnect 4C system.
Get Started
All you need to control your Uconnect system
with your voice are the buttons on your steering
wheel.
Helpful hints for using Voice Recognition:
• Visit UconnectPhone.com to check mobile
device and feature compatibility and to find
phone pairing instructions.
• Reduce background noise. Wind and pas-
senger conversations are examples of noise
that may impact recognition.
• Speak clearly at a normal pace and volume
while facing straight ahead. The microphone
is positioned on the rearview mirror and
aimed at the driver.
• Each time you give a Voice Command, you
must first push either the Voice Recognition
(VR) or Phone button, wait until after the
beep, then say your Voice Command.
• You can interrupt the help message or system
prompts by pushing the VR or Phone button
and saying a Voice Command from the cur-
rent category.
Uconnect Voice Command Buttons
1 — Push To Initiate Or To Answer A Phone Call,
Send Or Receive A Text
2 — For All Radios: Push To Begin Voice Com-
mands
3 — Push To End Call
Basic Voice Commands
The basic Voice Commands below can be given
at any point while using your Uconnect system.
Push the VR button
. After the beep, say:
• "Cancel" to stop a current voice session
• "Help" to hear a list of suggested Voice
Commands
• "Repeat" to listen to the system prompts
again
Notice the visual cues that inform you of your
voice recognition system's status. Cues appear
on the touchscreen.
269