Input Sel. Selection Screen; Window Sel. Selection Screen - Ikegami ML Series User Manual

6. Configuration
・ Factory Reset : Returns the setting to the default setting at the time of shipping from
the factory.
Executes by using "Reset Item Non / User / Display /Color/All
Execute".
6.7 Input selection screen
Function to allocate the signal input key.
Display screen
・ I N1 and IN2 are provided for the input selection key. Switching the input becomes
available with the key set to Yes.
6.8 selection screen
Function to set the multiple display.
Display screen
・Memory Number
・Memory Enable
・IN1 Video Source
・IN2 Video Source
・Multi Window Mode : Sets the condition of the 2 screen display.
・Window Position
・SWAP
Note1. PinP during the display, there is a case where joint is generated in the
sub-screen display.
Note2.PinP is only combination with a SDI signal.
: Specifies the preset number of the 2 screen setting.
: Sets valid/invalid of the preset number.
: Sets the input signal to be displayed on the Main screen.
: Sets the input signal to be displayed on the Sub screen.
: Sets the display position of the sub screen of IN1/IN2.
: Function to switch the main screen and the sub screen.
16