Setup Selection Screen - Ikegami ML Series User Manual

6.6 Setup selection screen

Function to return the user memory setting and adjustment value to the default value at
the time of purchase.
Screen display
Operation
Video
Color
Picture
Mode
Setup
Input
PinP
Function
Description of Memory Settings screen
・User Preset : Used to memorize up to eight different groups (1 to 8) of settings.
All the settings made on the menu screens can be put in memory.
・DPMS Enable : When set at ON, the display power management function puts the unit
in the power-save mode if a selected input has no signal and no key
is operated for longer than 3 minutes. The backlight is automatically
turned off.
Power OFF/ON: To be resumed by feeding a signal or operating a key.
・Menu Position : Used to select the on-screen display position. The numerical settings
allow the following display positions.
・Menu Display : Used to set the time for the on-screen display to disappear.
When the device is not operated for longer than the specified time, the
OSD automatically disappears after the set time.
・Logo Display : It is possible to select the logo display when the power is turned on:
Off
2s - 8s : The display duration can be set to a time from the range from
: Switching between English and Chinese.
・Language
: Setting of beep sound when the front key is operated.
・Touch Beep
Off : No beep. On : Beep Yes.
Long Press Enable:It is worked repeatedly. Disable: It is not worked repeatedly
>Reaction Quick、Normal、Slow
・Front key lock : Key lock function.
Off : Normal operation.
On : And key lock.
Keep touching the ENTER key for longer than 3 seconds for
releasing the lock.
: No logo is displayed
2 seconds to 8 seconds.
15
6. Configuration