Ikegami ML Series User Manual page 13

Maintenance
• Clean the cabinet, panel and controls with a soft cloth lightly moistened with a mild
detergent solution. Do not use any type of abrasive pad, scouring powder or solvent, such
as benzene.
• Do not rub, touch, or tap the surface of the screen with sharp or abrasive items such as
a ball-point pen or screwdriver. This type of contact may result in a scratched picture
panel.
• Clean the screen with a soft cloth, If you use a glass cleaning liquid. Do not use any
type of cleaner containing an anti static solution or similar additive as this may scratch
the screen's coating.
Carrying Precautions
When you carry a Color LCD Display with optional stand (TS-300), keep a LCD display
vertically during the transportation.
Please refer to Appearance view, with optional stand type illustrated in 8. Specifications.
The Color LCD Display equipment may fall, causing serious injury to children and adults,
and serious damage to the equipment.
Powering On The Unit
Connect the power supply to the DC input via the power plug. Plug in the AC adapter.
Connect the video source to the display. The IKEGAMI logo is displayed, followed shortly
by video.
The power supply interception method
Unplug a AC power cord.
Concerning handling of EN60601-1-2 (EMI) class B
This device requires installation of the following cores:
When SDI signal is input: Attach the supplied SFT-36SN(×2) to the connector
base section(input,output).
When Video signal is input: Attach the supplied SFT-36SN(×2) to the connector
base section(input,output).
When +5V is connection: Attach the supplied SFT-36SN and SFT-59SN(2T) to the
connector base section.
AC Power cord: Attach the suppliedSFT-59SN to the connector base section.
DC Power Cable: Attach the suppliedSFT-59SN to the connector base section.
Only MLW-2624C
When COM is connection: Attach the supplied SFT-36SN to the connector base section.
When S-Video is connection: Attach the supplied SFT-36SN to the connector base
section(input,output).
DC Power Cable: Attach the suppliedSFT-36SN to the connector base section.
3
1. Precautions