Taylor-Dunn SS-025-34 Operation, Maintenance, And Replacement Parts Manual page 187

75-442-55: Pin Removing Tool
Removes pins from Molex Mini-Fit harness
connectors.
77-200-00: Hydrometer
Used for testing battery electrolyte. Illustration
is of a typical hydrometer, actual hydrometer
type may vary.
Molex # 11-300-02: Pin Removing Tool
Removes 0.062 diameter pins from Molex
rectangular harness connectors. Not available
from Taylor-Dunn. Purchase from any local
electronics distributor.
APPENDIX A: SPECIAL TOOLS
41-350-13: Disc Brake Boot Installation Tool
Assists in installing the rubber boot onto the
disc brake piston.
72-201-00: Battery Filler
Used to safely add water to batteries.
Equipped with splash guard and auto-
shutoff when cell is full.
Molex # 11-300-06: Pin Removing Tool
Removes 0.093 diameter pins from Molex
rectangular harness connectors. Not available
from Taylor-Dunn. Purchase from any local
electronics distributor.
Appendixes
70-440-55: Pin Removing Tool
Removes pin from Amp circular harness
connectors.
Illustration Not
Available
96-500-40: Fork Collar Weld jig
Used to properly align the front fork collar when
replacing the collar in the frame. SS-536 and
MX-600 only.
Appendixes
Appendix A
Page 3