Connection Diagrams Pcb Scb-10; Symbols Used - DeDietrich AMC 15 Installation And Service Manual

Fig.49 DHW sensor
Tdhw
Fig.50 Contact temperature sensors
C B
Tflow Tflow
Fig.51 Anode connection for calorifier tank
TA
+ TA -
6.7

Connection diagrams PCB SCB-10

7686707 - v.01 - 06092018
Connecting the domestic hot water (DHW) sensor (NTC 10k Ohm/25°C).
AD-4000009-02
Connecting contact temperature sensors for system flow, DHW
temperatures or zones (groups).
S.DEP.A = temperature sensor (NTC 10k Ohm/25°C)
S.DEP.B = temperature sensor (NTC 10k Ohm/25°C)
S.DEP.C = temperature sensor (NTC 10k Ohm/25°C)
A
Tflow
AD-4000007-02
Connecting a TAS anode (Titan Active System) for a calorifier tank.
Connect the anode as follows:
- = connection on the calorifier tank
+ = connection on the anode
AD-4000005-02
6.7.1
Tab.25
Symbol
Connecting the domestic hot water (DHW) sensor
Connecting contact temperature sensors
Connecting the calorifier tank anode
Caution
If the calorifier tank does not have a TAS anode, connect the
simulation anode (= accessory)

Symbols used

Explanation of symbols in the hydraulics flow diagram
Explanation
Return pipe
Flow pipe
Motorised three-way valve
Pump
6 Installation
AMC 45