Description Of The Product; General Description; Operating Principle; Automatic Refill Device - DeDietrich AMC 15 Installation And Service Manual

4 Description of the product

4 Description of the product
Tab.11 Software and navigation information
Boiler AMC
Control panel Diematic Evolution
PCB SCB-10
4.1

General description

4.2

Operating principle

16 AMC
The AMC boiler is delivered with a combination of the control panel,
control unit and extension PCB. The contents of this manual are based on
the following software and navigation information:
Name visible in display
CU-GH08
MK3
SCB-10
The AMC boiler is a wall-mounted gas boiler with the following
characteristics:
High-efficiency heating
Low polluting emissions

Automatic refill device

High-quality electronic control panel
Easier installation and connection thanks to the mounting frame
delivered with the appliance.
The following boiler types are available:
Type
AMC 15
AMC 25
AMC 35
AMC 25/28 MI
4.2.1 Automatic refill device
The boiler has an automatic refill device located under the boiler.
The automatic refill device will refill the central heating system whenever
the water pressure is lower than the set minimum. Refilling can be
automatic or semi-automatic. On the semi-automatic setting, refilling will
only start after confirmation by the user. The automatic refill device can
also be used to fill an empty system.
If refilling takes too long or occurs too often (e.g. because the system
leaks), a warning code will appear on the display and refilling will stop.
4.2.2

Circulation pump

The energy-efficient, modulating circulation pump is controlled by the
control unit based on ΔT. The graphs show the total dynamic head at
various outputs.
Important
The benchmark for the efficient circulation pumps is EEI ≤ 0.20.
Software version
1.4
1.29
0.5
Mode
Heating only (option of producing domestic hot
water using a separate hot water appliance).
Heating and production of domestic hot water.
7686707 - v.01 - 06092018