RGBlink X2 Quick Start Manual page 21

a. Drag the opened layer by mouse. The details are: move the mouse to the brink of the opened layer, when the
mouse shows"<—>", press the left key of the mouse and drag the window to a suitable size and then release
the mouse. Or move the mouse to the lower right of the opened layer, press the left key of the mouse and drag
the window to a suitable size and then release the mouse. Move the mouse to the opened layer and press the
left key of the mouse and move the mouse, then the layer will be moved, release the mouse when moved to
the suitable location. But this method can only adjust the size and location roughly, if an accurate adjustment is
needed, the second method can be used.
b. Select the layer to be adjusted, and set the X, Y, width and height in the bottom of the interface.
Hierarchical relations between layers: After creating the layers, the hierarchical relations can be changed by the
following: click the shortcut key bring layer to top " ", bring layer to bottom " ", layer forward
" " or layer backward " ". The layer can be set as background by click " " and click " " to
remove the layer background.
Close one layer or all layers: Click the icon
on the top right corner of the layer to close one layer, or click
the shortcut key " " to close all layers.
Lock the layer: Click the icon on the top right corner of the layer to lock the layer, the layer can't be
moved or adjusted if be locked.
Full the layer: Click the icon on the top right corner of the layer to full cell, and click the icon to
full screen.
Copy and paste bank: Select the bank that to copy, and click the copy bank shortcut " " on the right side
of the interface, then select the bank that to paste, and click the paste bank shortcut " ". The selected
layer will pasted to the bank.
Adaptive: If scale the output area to a large area, click the adaptive shortcut "
" on the right side of the
interface, the output area will be return to the best position.
Layer Property Setting: Select the layer to be adjusted, click the More shortcut " " in the bottom of
the interface, and enter the interface as follows:
20