9.2.4 Entering the date/time
Sequence
Keypad entry
1.
D
2.
CR
3.
1(2) digits, CR
4.
1(2) digits, CR
5.
1(2) digits, CR
6.
1(2) digits, CR
7.
1(2) digits, CR
i The device monitors the plausibility of the entry. It interrupts an obviously incorrect entry (e.g. Date: 33. Month: 13 etc.)
with a renewed prompt (e.g. "*Month:") to enter the date/time again.
8.
CR
i If you are only changing individual values, you do not have to enter digits for unchanged values.
54
Exhaust-gas analyzer
Receives and sends back
Receives and starts input procedure
by transmitting "TAG"
Receives and stores both digits as
DAY in the clock element.
Transmits "MONTH"
Receives and stroes both digits as
MONTH in the clock element.
Transmits "YEAR"
Receives and stores both digits as
YEAR in the clock element.
Transmits "HOUR"
Receives and stores both digits as
HOUR in the clock element.
Transmits "MINUTE"
Receives and stores both digits as MINUTE
in the clock element. End of input
of DATUM/UHRZEIT
End of input
Feedback
D
Day:
MONTH:
YEAR:
Hour:
MINUTE: