Setting The Date And Time - Bosch BSA 42 Series Operating Instructions Manual

en �0 | BS� ���� | �ppendi�
8. Appendix
8.1

Setting the date and time

The date and time must be set in the following situations:
R
After a power cut.
R
When switching from summer to winter time.
The date and time can only be set by way of remote control.
Step
1. Exit from test routine.
2. Select configuration mode for time
and date.
3. Enter hours and minutes.
Example:
12:35 = 1x1000, 2x100, 3x10, 5x1
4. Confirm entry.
5. Enter month and day
Example:
24.01 = 0x1000, 1x100, 2x10, 4x1
6. Confirm entry.
7. Enter year.
Example:
2009 = 2x1000, 0x100, 0x10, 9x1
8. Confirm entry.
9. Store all settings.
|
1 691 506 010 2009-05-25
Remote control
+
Exit from test routine
Result / �nalog display
? Indicator lamp flashes.
Warning lamp OFF.
? Current test routine is displayed
(e.g. ).
P 1
? Warning lamp ON.
? Hours and minutes are displayed
(e.g. ).
1 2 . 1 0
? Month and day are displayed
e.g.
1 2 . 3 5
? Time is entered.
? Month and day are displayed
e.g.
0 1 . 2 4
? Month and day are entered.
? Year is displayed
e.g.
2 0 0 9
? Year is set.
? Return to operating system.
? Warning lamp OFF.
? Current test routine is displayed
(e.g. ).
P 1
"
Date and time are set.
Robert Bosch GmbH