A Technical Specifications - Siemens SIMATIC FM 351 Manual

Technical Specifications
General Technical Specifications
The following Technical Specifications are described in the reference manual
S7-300/M7-300 Programmable Controllers, Module Data .
Electromagnetic compatibility
Transport and storage conditions
Mechanical and climatic ambient conditions
Details on insulation tests, class and level of protection.
Approvals and Standards
Warning
!
Injury to persons and damage to property may occur.
In areas subject to explosion hazards, persons may be injured and property
damaged if you disconnect lines to S7-300 during operation.
Electrically disconnect the S7-300 before separating plug connections in areas
subject to explosion hazards.
Warning
!
WARNING - DO NOT DISCONNECT WHILE CIRCUIT IS LIVE
UNLESS LOCATION IS KNOWN TO BE NON-HAZARDOUS
CE Mark
Our products meet the requirements of the EU directive 89/336/EEC
"Electromagnetic Compatibility" and the harmonized European standards (EN)
listed in the directive.
In compliance with the above mentioned EU directive, Article 10, the conformity
declarations are available to the relevant authorities at the following address:
FM 351 Positioning Module
C79000-G7076-C351-02
A
A-1