Siemens SIMATIC FM 351 Manual page 175

Table C-1 Content of the Channel DB
Address Name
Done Bits for Write Jobs
39.0 MDWR_D
39.1 MD_D
39.2 DELDIST_D
39.3 AVALREM_D
39.4 TRGL1WR_D
39.5 TRGL2WR_D
39.6 REFPT_D
39.7 AVAL_D
40.0 FVAL_D
40.1 ZOFF_D
40.2 TRG252_254_D
40.3 TRG255_D
40.4 DELDIAG_D
Done Bits for Read Jobs
40.5 MDRD_D
40.6 TRGL1RD_D
40.7 TRGL2RD_D
41.0 MSRRD_D
41.1 ACTSPD_D
41.2 ENCVAL_D
FM 351 Positioning Module
C79000-G7076-C351-02
Data Initial
Type Value
BOOL FALSE 1 = "write machine data" job
BOOL FALSE 1 = "activate machine data" job
BOOL FALSE 1 = "delete remaining distance" job completed
BOOL FALSE 1 = "cancel set actual value" job
BOOL FALSE 1 = "write incremental dimension table 1" job
BOOL FALSE 1 = "write incremental dimension table 2" job
BOOL FALSE 1 = "set reference point" job
BOOL FALSE 1 = "set actual value" job completed
BOOL FALSE Not used
BOOL FALSE Not used
BOOL FALSE 1 = "write incremental dimension for incremental
dimension number
BOOL FALSE 1 = "write incremental dimension for incremental
dimension number
BOOL FALSE 1 = "delete diagnostic buffer" job
BOOL FALSE 1 = "read machine data" job
BOOL FALSE 1 = "read incremental dimension table 1" job
BOOL FALSE 1 = "read incremental dimension table 2" job
BOOL FALSE Not used
BOOL FALSE 1 = "read actual speed, remaining distance and
completed
BOOL FALSE 1 = "read encoder values" job completed
Data Blocks/Error Lists
Description
completed
completed
completed
completed
completed
completed
254" completed
255" completed
completed
completed
completed
completed
current incremental dimension" job
C-5