Step 4B: Signing The Bitstream Using The Quartus_Sign Command - Intel Stratix 10 User Manual

3. Using the Authentication Feature
UG-S10SECURITY | 2019.05.10
6. For Output directory click Browse and navigate to your output files directory.
7. On the Output Files tab, select Raw Binary File (.rbf).
8. On the Input Files tab, click Add Bitstream then browse and select your
file.
Figure 9. Input File Properties
9. On the Input Files tab, click Add Bitstream and then browse to your bitstream.
10. On the Input Files tab, click Properties... and make the following selections
under Signing tool settings:
a. For Enable signing tool, select PEM based signing.
b. For Private key file, browse to the appropriate private PEM file. Retain the
default values for the remaining options.
Note: If your

3.4.2. Step 4b: Signing the Bitstream Using the quartus_sign Command

The
quartus_sign
( ), and the unsigned raw binary file (
.pem
signed .
rbf
Send Feedback
is password-protected, the GUI opens a dialog box to enter
.pem
the password.
command takes the signature chain (
.
), a private signing key
.qky
) as inputs to generate the
.rbf
® ®
Intel Stratix 10 Device Security User Guide
.sof
Add
Bitstream
Properties
(for .sof)
19