Authentication For Hps Software - Intel Stratix 10 User Manual

2. Design Authentication
UG-S10SECURITY | 2019.05.10

2.2.1. Authentication for HPS Software

If you are using an SoC device, the HPS Boot Code is part of the bitstream that is
authenticated by the SDM during configuration.
After you successfully load the HPS Boot Code on the Intel Stratix 10 device, you may
need to ensure that the following boot stages of the HPS Software are also
authenticated.
The
Rocketboards
the subsequent boot stages of the HPS software.
Related Information
Intel Stratix 10 SoC Secure Boot Demo Design
Send Feedback
web page includes an example that uses U-boot to authenticate
® ®
Intel Stratix 10 Device Security User Guide
13