Intel Stratix 10 User Manual page 21

Device security

Hide thumbs Also See for Stratix 10:

Table of Contents

3. Using the Authentication Feature

UG-S10SECURITY | 2019.05.10

Add QKY File

Right-Click the

Stratix 10 Device

3. Browse to the owner public root key file and click Open.

Note: Once you have specified the QKY file, the programmer displays the

4. You can choose to program the non-volatile eFuses or simulate the actual

hardware using virtual eFuses.

— To select virtual eFuses, on the Programmer Tools menu, select Options. Turn

on Enable device security using a volatile security key if this option is

not already on. By default this option is on. Then, select OK.

Volatile

eFuses

— To select the actual non-volatile eFuses, on the Programmer Tools menu,

select Options. Turn off the Enable device security using a volatile

security key option.

5. To verify that the fuse value and the hash value of the owner public root key

match, turn on the Verify option in the Intel Quartus Prime software.

Send Feedback

compatible version of firmware that you use to program the device. The

version of the Intel Quartus Prime Programmer and the firmware must

match. The QKY file specifies the compatible version of the firmware that

you must load.

Intel

Stratix

10 Device Security User Guide

Table of Contents