SSANGYONG Korando 2012 Manual page 427

08-4
2. INSPECTION
Problem
- Leak from the radiator
-
Leak from the coolant auxiliary tank
- Leak from the heater core
- Leak from the coolant hose connections
Damaged coolant hose
-
Coolant
- Leak from the water pump gasket
level is too low
- Leak from the water pump internal seal
- Leak from the water inlet cap
- Leak from the thermostat housing
- Incorrect tightening torque of the cylinder
head bolts
- Damaged cylinder head gasket
- Coolant leakage (Coolant level is low)
Improper coolant mixture ratio
- Kinked coolant hose
-
- Defective thermostat
- Defective water pump
- Defective radiator
- Defective coolant auxiliary tank or tank
Coolant
cap
temperature is
- Cracks on the cylinder block or
too high
cylinder head
- Clogged coolant passages in the
cylinder block or cylinder head
-
Clogged radiator core
- Improper operation of cooling fan
- Defective temperature sensor or faulty
wiring
Possible Cause Action
- Change the radiator
-
Change the coolant auxiliary tank
- Change the heater
- Reconnect the hose or replace the
clamp
- Change the hose
- Change the gasket
- Change the water pump
- Change the water inlet cap gasket
Change the thermostat sealing
-
- Tighten the bolts to the specified
torque
- Change the cylinder head gasket
- Add coolant
- Check the coolant concentration
(Anti-freeze)
- Repair or replace the hose
- Change the thermostat
- Change the water pump
- Change the radiator
- Change the coolant auxiliary tank or
tank cap
- Change cylinder block or cylinder
head
- Clean the coolant passage
- Clean the radiator core
- Replace the cooling fan or repair the
related circuit
- Replace the sensor or repair the
related wiring