4.21.39 show ip dhcp snooping
Command:
show ip dhcp snooping [interface ( <port_type> [ <port_list> ] )]
show
Show running system information
ip
Internet Protocol
dhcp
Dynamic Host Configuration Protocol
snooping
DHCP snooping
interface
Select an interface to configure
Default:
N/A
Usage Guide:
To display the DHCP Snooping configuration.
Example:
To display the DHCP Snooping configuration for GigabitEthernet 1/1.
Switch # show ip dhcp snooping interface GigabitEthernet 1/1
GigabitEthernet 1/1 untrusted
4.21.40 show ip dhcp snooping table
Command:
show ip dhcp snooping table
show
Show running system information
ip
Internet Protocol
dhcp
Dynamic Host Configuration Protocol
snooping
DHCP snooping
table
show ip dhcp snooping table
Default:
N/A
Usage Guide:
Command Guide of MGSW-28240F
-369-
Need help?
Do you have a question about the MGSW-28240F and is the answer not in the manual?