Radius-Server Deadtime; Radius-Server Host - Planet Networking & Communication MGSW-28240F Command Manual

Example:
To configure the NAS-IPv6-Address (2001::7788)
Switch# configure terminal
Switch (config)# radius-server attribute 95 2001::7788

4.2.184 radius-server deadtime

Command:
radius-server deadtime <Minutes : 1-1440>
radius-server Configure RADIUS
deadtime Time to stop using a RADIUS server that doesn't respond
<Minutes : 1-1440>
Default:
0
Usage Guide:
To configure the Deadtime of Radius-Server
Example:
To configure the Deadtime (15) of Radius-Server
Switch# configure terminal
Switch (config)# radius-server deadtime 15

4.2.185 radius-server host

Command:
radius-server host <host_name> [ auth-port <auth_port> ] [ acct-port <acct_port> ]
[ timeout <seconds> ] [ retransmit <retries> ] [ key <key> ]
radius-server Configure RADIUS
host Specify a RADIUS server
<HostName : word1-255>
acct-port UDP port for RADIUS accounting server
Time in minutes
Hostname or IP address
Command Guide of MGSW-28240F
-284-