Banner Login - Planet Networking & Communication MGSW-28240F Command Manual

Switch# configure terminal
Switch (config)# banner exec 1
Enter TEXT message. End with the character '1'.
gggggg
1
Telnet 192.168.0.100:
Username: admin
Password:
gggggg
#

4.2.22 banner login

Command:
banner login <LINE>
<LINE> c banner-text c, where 'c' is a delimiting character
Default:
N/A
Usage Guide:
To configure login banner-text.
Example:
To configure login banner-text with word "wwwwwwwwww".
Switch# configure terminal
Switch (config)# banner login 1
Enter TEXT message. End with the character '1'.
wwwwwwwwww
1
Console:
Press ENTER to get started
wwwwwwwwww
Username: admin
Command Guide of MGSW-28240F
-62-