Planet Networking & Communication MGSW-28240F Command Manual page 300

spanning-tree aggregation
spanning-tree Spanning Tree protocol
aggregation Aggregation mode
Default:
None
Usage Guide:
To enter aggregation mode of STP
Example:
To enter aggregation mode of STP
Switch# configure terminal
Switch (config)# spanning-tree aggregation
Switch (config-stp-aggr)#
4.2.198.1 do
Command:
do < exec commands >
do To run exec commands.
Default:
N/A
Usage Guide:
To run exec commands.
Example:
To run "show aaa".
Switch# configure terminal
Switch (config)# spanning-tree aggregation
Switch (config-stp-aggr)#do show aaa
console : local
telnet : local
ssh : local
Command Guide of MGSW-28240F
-300-