Table of Contents
Advertisement
To display the unicast slave table.
Example:
To display the unicast slave table for PTP instance 0.
Switch # show ptp 0 slave-table-unicast
ip_addr
---------------
4.21.84 show ptp ext
Command:
show ptp ext
show
Show running system information
ptp
Precision time Protocol (1588)
ext
Show the 1PPS and External clock output configuration and vcxo frequency rate adjustment option
Default:
N/A
Usage Guide:
To display the external clock output configuration.
Example:
To display the external clock output configuration.
Switch # show ptp ext
PTP External One PPS mode: Output, Clock output enabled: True, frequency : 1, VCXO
enable: True
4.21.85 show pvlan
Command:
show pvlan [ <pvlan_list> ]
show
Show running system information
pvlan
PVLAN configuration
Default:
mac_addr
port Ann Sync
-----------------
----
Command Guide of MGSW-28240F
---
-----
-404-
Advertisement
Table of Contents
