Show Port-Security Port - Planet Networking & Communication MGSW-28240F Command Manual

Usage Guide:
To display the PHY status.
Example:
To display the PHY status.
Switch # show platform phy status interface GigabitEthernet 1/1
Port Issues seen during 1G PHY warmstart
---- -----------------------------------
1

4.21.77 show port-security port

Command:
show port-security port [ interface ( <port_type> [ <port_type_list> ] ) ]
show Show running system information
port-security port-security
port Show MAC Addresses learned by Port Security
interface Search by port
Default:
N/A
Usage Guide:
To display the MAC Addresses of Port Security.
Example:
To display the MAC Addresses of Port Security.
Switch # show port-security port interface GigabitEthernet 1/1
GigabitEthernet 1/1
-------------------
MAC Address
-----------------
<none>
No
VID State Added
---- ---------- -------------------------
Command Guide of MGSW-28240F
Issues during 10G PHY WS
------------------------
No
-399-
Age/Hold Time
-------------