Plc Access Rights; Configuration Via Html - Panasonic FP Web-Server2 Hardware And Configuration Manual

HTTP server functions/web pages
N o t e
R e f e r e n c e

12.2.1 PLC access rights

12.2.1.1 Configuration via HTML

118
 If spaces or Japanese characters are used, an error message pops up
before transmission to the FP Web-Server.
 All file names have to correspond to the DOS 8.3 format, i.e. the name
may only have up to 8 characters and the extension (type) only up to
3 characters after the period. (For FP-WEB2, (see p. 16) you can use
long file names without special characters.)
 Recommended are actual browsers like e.g. MS Internet Explorer,
Mozilla Firefox, Apple Safari or Google Chrome.
 The file size displayed shows not the exactly value because it is
rounded to whole KB.
 System, hidden and scc files are ignored by the Web file functions and
not displayed in the list.
 Press <F5> to reload and refresh the file list display.
For more detailed information, please refer to the online help under the
following keywords:
"Open file with default editor", "edit with an alternate editor", "available
memory", "uploading the selected file to the remote unit", or "PLC access
rights".
The setting defines the restrictions to read/write the settings to/from the
chip.ini (configuration file). If changes are made in this way the offline
project will differ from the real unit settings. Changing the settings can be
used if a running FP WEB-Server unit should be modified via HTML in a end
customer application.
Type e.g. "http://199.199.26.52/plc?chip to read the configuration.
FP Web-Server V2.810 EN