Hardware Version - Panasonic FP Web-Server2 Hardware And Configuration Manual

Hardware description
Comments:

2.1.2 Hardware version

Model 1: "FP Web-Server" unit (FP-WEB)
Model 2: "FP Web-Server2" unit (FP-WEB2)
16
See above for a more detailed overview (see p. 8) of the FP Web-Server
functions. There you can also find a block diagram, a list of features and a
brief description.
A data sheet can be found below which also lists the supported standards
and protocols.
 A standard HTML editor (not supplied with the FP Web-Server
Configurator Tool) is needed to design HTML Web pages. HTML pages
can easily be created with the FP Web Designer (product number:
AFPS36510) without knowledge of HTML or any other programming
language.
 A standard Internet browser, e.g. Microsoft Internet Explorer, Mozilla
Firefox, Google Chrome, Apple Safari, Opera, is recommended for
displaying the HTML pages.
The unit hardware model and version is printed on the type plate. Two
different hardware models are available:
The hardware version 1.2 (available since 2003) is identical to hardware
version 1.1 except that the pin assignment of the 9-pin RS232C connector
was optimized and the UL approval sign is printed on the unit label.
Hardware version 1.3 (available since the beginning of 2006) is identical to
hardware version 1.2 but with the Panasonic logo and RoHS conformity.
Version 1.0 of this new hardware model has been available since December
2006.
The following table presents a brief comparison of the two models.
Ethernet interface
Application memory
CPU speed
FP-WEB2 FP-WEB
100Mbps 10Mbps
8MB Flash 0.5MB Flash
24 bits at 25MHz 16 bits at 20MHz
FP Web-Server V2.810 EN