Mechanical Installation - Panasonic FP Web-Server2 Hardware And Configuration Manual

2.1.8 Mechanical installation

a) Adding to FP0:
P r o c e d u r e
FP Web-Server V2.810 EN
1. Raise the expansion hooks on the top and bottom sides of the unit with
a screwdriver
2. You can align the pins and holes in the four corners of the control unit
and expansion unit, and insert the pins into the holes so that there is no
gap between the units
However you need not necessarily connect the FP Web-Server in this
way.
Note:
Make sure that the FP Web-Server is the last unit attached. Otherwise
the CPU cannot communicate with the expansion units.
Hardware description
23