Wiring; Connecting The Plc Tool Port Using The Cable Aigt8192; Using The Plc Tool Port With The Fp-I4C Com1; Using The Plc Tool Port With The Fp-I4C Com2 - Panasonic FP-I4C Quick Start Manual

5

Wiring

5.1

Connecting the PLC TOOL port using the cable AIGT8192

For FP0R, FPS, FP-X, FP2/FP2SH: Use either COM1 or COM2 for communication
(depending on the PLC interface settings)
5.1.1

Using the PLC TOOL port with the FP-I4C COM1

Wire the TOOL port with the FP-I4C 16-pin connector (COM1)
(4)
(1) Brown: S (COM1) to pin 1
(2) Red, white: R (COM1) to pin 2
(3) Orange, green: G (COM1) to pin 3
(4) PLC TOOL port mini-DIN, 5-pin male
(5) FP-I4C 16-pin connector
5.1.2

Using the PLC TOOL port with the FP-I4C COM2

Wire the PLC TOOL port with the FP-I4C 16-pin connector (COM2).
FP-I4C
5.1 Connecting the PLC TOOL port using the cable AIGT8192
(2)
(1)
S (COM1) R(COM1)
(3)
G (COM1)
G(COM1)
F1 F2
S/ - (COM2) R/ + (COM2)
S/ - (COM2)
R/ + (COM2)
S/ - (COM2) E
SG SG
(5)
29