Table of Contents
Advertisement
FTP immediately repeats
FTP file extension replacement
N o t e
10.1.4 Start e-mail transmission
N o t e
FP Web-Server V2.810 EN
If a file has not been transmitted successfully, the FP Web-Server tries to
resend it immediately. Specify the number of transmissions (1..9) before
the function ends with an error. Enter 1 if the FP Web-Server should not try
to resend the file.
Preset the file extension replacement. If a file is sent successfully, it will be
renamed. The right part of the original file name will be replaced by this
setting to mark the file as "transmitted". Choose any text with up to 16
characters.
The word DELETE (case sensitive!) will delete the file instead of renaming.
If this function is enabled, the FP Web-Server checks the SD card on the
expansion unit and transmits the stored files of the data logger function
(see p. 61) or manually created files.
No PLC is needed to control the data transmission.
Preset the additional settings in the "E-mail (see p. 47)" tab.
In the default configuration, all files of the configured data logging function
will be transferred. After successful transmission the files will be renamed
(e.g. Myfile.CSV to MyFile.CS_ ).
The file which is currently used to log will not be transferred.
FPWEB Script
71
Advertisement
Table of Contents
