Panasonic FP Web-Server2 Hardware And Configuration Manual page 14

Data logger: (see p. 61)
Secure data transmission and authentication: (see p. 58)
The FP Web-Server comes in an FP0 housing and has the following interfaces: (see "Hardware
description" on p. 15)
The optional FP Web Expansion unit has the following functions:
Configurator software (see p. 39)
FP Web-Server V2.810 EN
 The FP Web-Server unit can log PLC data (see p. 61) and store it on the
optional SD memory card or send it via FTP (see p. 52).
 The FP Web-Server unit can communicate via OpenVPN (see p. 58) to
get an encrypted and secure data transmission and authentication.
 RS232C interface which can be connected to the PLC (MEWTOCOL
protocol)
 Ethernet 10/100BaseT interface for network connections using the TCP/
IP protocol
 2nd RS232C interface for an optional modem or for full transparent
Ethernet/ RS232C communication
 USB 1.1 host port
 RS485 port
 Digital output
 SD memory card slot
A Windows program is supplied to make the configuration and the setup of
the FP Web-Server easy. This configuration program is called "Control FP
Web Configurator Tool". It helps the user to quickly set up and change the
following items, e.g.:
 Automatic integration of PLC data into HTML pages
 Preparation of pre-stored mail addresses and texts
 TCP/ IP address and parameter configuration (DHCP is also possible)
 Password and security setup
Getting started
13