Table of Contents
Advertisement
N o t e
2.1.5 Technical data
FP Web-Server V2.810 EN
LEDs (see p. 177).
The expansion connector is for the FP Web expansion unit only.
FP0 expansion units are not supported and may damage the FP-WEB2
unit.
Only FP-WEB2 units with hardware version greater than 1.1 are
equipped with the connector for the FP Web expansion unit.
Feature
Product number
FP Web-Server
PLC connection
Modem / 2nd
RS232C
Power supply
Ethernet connection
LEDs (see p. 177)
Protocols and
standards
Flash memory
RAM
Operating voltage
Current consumption Approx. 75mA at 24V DC
Degree of protection
Ambient temperature
Storage temperature
Humidity
Vibration resistance
Shock resistance
Dimensions
Description: Type 1
PN Hardware: FP-WEB
PN Configurator: FPWEBTOOL2
PLC COM: RS232C via 3-pin screw terminal port Plug:
Phoenix product: MC1,5/3-ST-3,5 Order Number: 18 40
37 9
Modem COM: RS232C via 9-pin SUB-D port, with RTS,
CTS Plug: 9-pin SUB-D female
24V DC Molex 35 plug on the bottom side of the unit
Ethernet-COM: 10BASE-T
via RJ45 female connector
Power, Ethernet, PLC data
exchange
TCP/IP, UDP/IP, DHCP, FTP, TELNET, http, https, SMTP,
ESMTP-Auth, POP3, PPP, IEC60870, NTP, Modbus,
DynDNS, SNMPv1
512KBytes
For further information, refer to Available Memory
Calculation
512KBytes
24V DC (10.8 – 26.4V DC supplied by class 2 circuit
only)
0°C to +55°C
-20°C to +70°C
Max. 30% to 85% (non-condensing)
10Hz to 55Hz, 1 cycle per minute with a double
amplitude of 0.75mm; 10 minutes every X-, Y-, and
Z-axis
Min. 10g; 4 times every X-, Y-, and Z-axis
Height 90mm, Width 25mm, Depth 64mm
Hardware description
Type 2
PN Hardware: FP-WEB2
10BASE-T / 100BASE-TX
autoneg via RJ45 female
connector
Power, Ethernet, Ethernet
data, PLC data
8MBytes
in the online help.
8MBytes
Approx. 65mA at 24V DC
IP20
19
Advertisement
Table of Contents
