Panasonic FP Web-Server2 Hardware And Configuration Manual page 181

Additional information
Computer:
FP Web-Server:
A) In a "self set-up" network (see p. 181) (e.g. with only one hub) the fixed IP addresses can be
assigned by yourself.
B) In case the FP Web-Server should be connected to an existing network, the following data
must be asked from the network administrator:
180
The following recipient's addresses are fixed:
 255.255.255.255. broadcast "to all"
 Network address = 0 "the own network"
For information of the TCP/ IP installation on a Windows computer refer
the online help under
via LAN.
The IP address of the FP Web-Server can be fixed or it can be allocated
dynamically by a DHCP-Server. For more information refer to
help under DHCP or Fixed IP Address.
The following two decisions can be made to set up the IP configuration of
the FP Web-Server:
In many cases a class C network is used. The network is identified by 3
numbers. The participants (Computers, Units, FP Web-Server...) are
distinguished by the last number (1 to 254), e.g. 192.168.206.1 to
192.168.206.254.
In case this network is connected to a second network via a gateway
(e.g. the computer for configuration might be in this network), the
gateway address also needs to be specified, e.g.:
Computer in x.y.206.z Network with Netmask 255.255.255.0, using the
x.y.206.1 Gateway.
FP Web-Server in x.y.60.z
The network should have the following settings:
 IP Add=x.y.60.31
 Netmask=255.255.255.0
 Gateway=x.y.60.1
 Is there a DHCP-Server in the network? If NOT:
TCP/ IP Setup for Configurator/Browser Operations
the online
FP Web-Server V2.810 EN
to