How To Use The Accessories - Kärcher SGV 6/5 Operation Manual

New & Reconditioned Equipment & Parts - www.southeasternequipment.net
 Fold out the holder for the floor nozzle
(parking position).
 Remove the floor nozzle from the steam
suction pipe.
 Snap the steam suction pipe in the re-
tainer (bottom) and the holder (top) in a
way that the handle points outwards.
 Press the steam switch briefly. Self-
cleaning starts.
# # # # _ _ _ _ _ _
Self-cleaning proceeds automatically. Time
elapsed is displayed.
After each operation
 Empty fresh water container.
 Empty detergent container (SGV 8/5).
 Empty and clean wastewater container.
 Thoroughly clean accessories: Clean
handle, steam suction hose and acces-
sory plug using a damp cloth. Clean the
remaining accessories under running
water.
 Clean the outside of the appliance with
a damp cloth.
Storing the Appliance
 Press the locking mechanism of the ac-
cessory plug and pull the accessory
plug out of the accessory outlet.
 Allow accessories to dry sufficiently and
place them in the accessory tray.
 Empty fresh water container.
 Only SGV 8/5: Empty and clean deter-
gent container.
Illustration
 Store floor nozzle, steam suction pipes,
steam suction hose and power cable as
shown in the illustration.
Self-cleaning
see quick start
start
self-cleaning
Self-cleaning
Self-cleaning
completed
 Remove all water from the appliance
prior to longer periods of non-use to
avoid offensive odours.
 Allow appliance to dry sufficiently:
Slightly pull out the wastewater, fresh
water, and detergent container and
open the cover of the accessory tray.
 Place the appliance in a dry room and
secure it from unauthorized use.
Note: Always allow the brushes to cool
down so that any deformation of the bristles
is avoided.

How to use the accessories

Note: Detergent residue or care emulsions
that are still present on the surface to be
cleaned can lead to streaks during steam
cleaning. However, these will disappear
with repeated cleaning procedures.
Handle without accessories
Application examples
– Elimination of odours and wrinkles from
hanging pieces of clothing, by steaming
them from a distance of 3.9-7.9 in (10-
20 cm).
Detail nozzle
The closer you hold the nozzle to the dirty
spot, the higher the cleaning effect as tem-
perature and pressure of the steam reach
their maximum values immediately when
they are emitted from the nozzle.
Application examples
– The use of the detail nozzle is recom-
mended for hard to reach areas.
– Treatment of stains on carpeted floors
or carpets prior to the use of the brush.
– Cleaning of stainless steel, window
panes, mirrors and enamel surfaces.
– Cleaning of corners on stairs, window
frames, door posts, aluminium profiles.
– Cleaning of fittings.
– Cleaning of window shutters, radiators,
interior cleaning of vehicles.
– 8
EN 17