Operation - Kärcher SGV 6/5 Operation Manual

New & Reconditioned Equipment & Parts - www.southeasternequipment.net
 Connect accessory: Connect the han-
dle or the steam suction hose with the
desired accessory. Slide parts into each
other until the accessory lock snaps into
place.
 Disconnect accessory: Hold the acces-
sory lock down and pull the accessory
parts apart.
Accessories with screw connection
 Connect and hand-tighten screwable
accessories.
Replacing the inserts of the floor
Illustration
Replacing the inserts of the hand
Illustration
Always place the machine in a horizontal
position during operation.
Only SGV 8/5:
– Text or a line/bar presentation is shown
on the display.
– The line/bar presentation depicts a cer-
tain period of time. At the beginning of
the period of time 10 bars are shown,
which are replaced by lines from the
right to the left until 10 lines are shown
in the end.
# # # # _ _ _ _ _ _
Factory-set display language
– English
Selecting the display language
Available display languages:
– German
– English
– French
– Spanish
– Japanese
 Set the rotary switch on the appliance to
"0/OFF".
14
nozzle
nozzle

Operation

Display
Text
 Set the handwheel on the handle to
cold water.
 Press the suction button and the steam
switch.
 Set the rotary switch to cold water/suc-
tion operation.
The lower line is flashing as the display lan-
guage has not been saved yet.
 Release the suction button and the
steam switch.
 Select a language by means of the
handwheel.
 Press the steam switch in order to save
the display language. The bottom line
stops flashing.
Turning on the Appliance
ATTENTION
Risk of damage! Do not tilt the appliance
while it is switched on.
 Plug in the mains plug.
 Set the rotary switch to the desired op-
erating mode.
Cold water/suction operation
Note: With this operating mode the hand-
wheel has the "Apply cold water" function in
every position. The steam/hot water opera-
tion is deactivated.
 Set the rotary switch to cold water/suc-
tion operation.
Applying cold water
 Press the steam switch. Cold water is
dispensed as long as the button is
pressed.
Vacuuming operations
 Start suction operation: Press suction
button briefly.
 End suction operation: Press suction
button again briefly.
– 5
EN
language
English
filling process
please wait
cold water