Connecting The Dp Network - Siemens SIMATIC ET 200S Manual

Example of the use of network components
The figure below shows the example from Figure 4-3 with the use of the network
components. Connecting the bus cable to the bus connector is described in the
Product Information document for the bus connector.
PD
Figure 4-5
ET 200S IM 151-7 CPU Interface Module
A5E00058783-04
PD connecting cable
Bus cable
Connector
Bus cable

Connecting the DP network

ET 200S in the PROFIBUS Network
S7-300 (DP master)
Bus connector with a PD socket
ET 200S
4-7