Routing - Teleservice Application Example - Siemens SIMATIC ET 200S Manual

Functions of the IM 151-7 CPU
Application example: TeleService
As an application example, the following figure shows the teleservice of an S7
station by a PD. The connection is established across subnetwork boundaries and
by means of a modem connection.
The lower section of the figure show how easily this can be configured in STEP 7.
Actual
configuration
Programming device
Configuring in STEP 7
Figure 8-9
More information ...
S More information on the configuration using STEP 7 can be found in the
Configuring hardware and connections with STEP 7 manual.
S More basic information can be found in the Communication with SIMATIC
manual.
S More information on the TeleService adapter can be found in the Internet. In the
Manual Search section, you can find the relevant documentation to download
under the A5E00078070 search term.
8-40
Modem Modem
Programming device
Subnetwork 1 (e.g. MPI network)
Routing – TeleService application example
e.g. IM 151-7 CPU with
the DP master module
as the DP master
TeleService
Subnetwork 2 (e.g.
adapter
PROFIBUS-DP
network)
Subnetwork 1
(e.g. MPI network)
e.g. IM 151-7 CPU with
the DP master module
as the DP master
Subnetwork 2 (e.g. PROFIBUS-DP
network)
ET 200S IM 151-7 CPU Interface Module
e.g. ET 200S
DP slave
e.g. ET 200S
DP slave
A5E00058783-04