Connecting The Dp Network - Siemens SIMATIC IM 151/CPU Manual

ET 200S in the PROFIBUS Network
Example of the Use of Network Components
The figure below shows the example from Figure 3-2 with the use of the network
components. Connecting the bus cable to the bus connector is described in the
Product Information document for the bus connector.
Programming device connecting cable
PG
Figure 3-5
Connecting the IM 151/CPU FO
You can find information on the connection and wiring of fiber-optic cables in the
chapter on wiring and fitting in the ET 200S Distributed I/O Device manual.
3-8
Bus cable
Connector
Bus cable

Connecting the DP Network

S7-300 (DP master)
Bus connector
with a programming device socket
ET 200S
ET 200S Interface Module IM 151/CPU
A5E00058783-01