Screen Innovations Zen Box Owner's Manual page 9

INSTALLING THE TRACKS -
Angle the zipper track up into and behind the upper most spring. The top of the track is the side with
the notches cut out. Then slide it up into the zipper on the shade material until it is pushed all the
way up to the track top cap. Finally use a flat head screw driver or card to compress the springs and
make sure they are all pushing back on the plastic track.
Zen Box - Shyzip - Installing the tracks
3
INSTALLING THE TRACKS -
Do not use powered screw driver to avoid stripping screws.
Place the removeable cover onto the fixed track and and hold into place while securing with the
retaining screws.
Pg 13 Zen Box - Shyzip - Installing the tracks
4
Pg 14