Download
Share
Print this page
Screen Innovations Nano Roll 275 Series Installation Instructions Manual
  1. Manuals
  2. Brands
  3. Screen Innovations Manuals
  4. Indoor Furnishing
  5. Nano Roll 275 Series
  6. Installation instructions manual

Screen Innovations Nano Roll 275 Series Installation Instructions Manual

24vdc - rts
Hide thumbs Also See for Nano Roll 275 Series:

Advertisement

Quick Links

Download this manual
Nano Roll
Installation Instructions
24v DC - RTS
INSTALLERS: Please leave this manual with the owner.
Doc. # 400029

Advertisement

loading

Related Manuals for Screen Innovations Nano Roll 275 Series

Summary of Contents for Screen Innovations Nano Roll 275 Series

  • Page 1 Nano Roll Installation Instructions 24v DC - RTS INSTALLERS: Please leave this manual with the owner. Doc. # 400029...

  • Page 2: Terminal Blocks

    PARTS LIST - NANO ROLL - 24v DC - RTS Shades Terminal Blocks 275 Roll 375 Roll 475 Roll Please note all the Serial No.s on your Shade motors. See the last page on these instructions. Wall Brackets (275) + End Caps Motor Side Idler Side Screws included (3 per bracket)
  • Page 3 PARTS LIST - NANO ROLL - 24v DC - RTS Spacer Blocks (optional) Leveling Shims (optional) Parts list - Nano Roll - 24v DC - RTS...

  • Page 4: Additional Accessories

    ADDITIONAL ACCESSORIES 5/16” Magnetic Driver Set Screw Hex Tool (1/16”) Included with 375 / 475 series only 1/4” Magnetic Driver Included with 275 series only Note: For more information about these tools and their use, please call Tech Support at 512.832.6939 Opt.
  • Page 5 SPACER BLOCKS AND LEVELING SHIMS (OPTIONAL) Spacer Blocks - used to clear an obstruction in the fabric path. Connect spacer blocks to shade brackets before installation. Note: Do not use more than 4 spacer blocks per bracket. Leveling Shims - used if the window frame is out of level. Connect to shade brackets before installation Note: Do not use more than 2 leveling shims per bracket.
  • Page 6 INSTALLATION - 24v DC - RTS (275 SERIES) Before installing the shades, verify whether the shade was ordered as standard roll or reverse roll. Though illustrations in this manual show standard roll shades, the installation for reverse roll shades is the same. 1.
  • Page 7 INSTALLATION - 24v DC - RTS (275 SERIES) 3. Measure bracket to bracket width and verify it matches the ordered width. Adjust accordingly. Brackets must be level before the shade is installed! 4. Remove idler end cap with flat screw driver Installation - Nano Roll - 24v DC - RTS (275)
  • Page 8 INSTALLATION - 24v DC - RTS (275 SERIES) 5. Connect shade and pre-wire connectors, snap into bracket 6. Insert motor side completely. Then, while supporting motor side, put idler end cap over the idler and snap into place. When installing, the shade should be at the upper limit.
  • Page 9 INSTALLATION - 24v DC - RTS (275 SERIES) There will be an audible click. Installation - Nano Roll - 24v DC - RTS (275)
  • Page 10 INSTALLATION - 24v DC - RTS (375 / 475 SERIES) 1. Terminate pre-wire with terminal block Header + 24 VDC - 24 VDC Used 2. If mounting to a wall, remove the ceiling flange from motor and idler brackets Installation - Nano Roll - 24v DC - RTS (375 / 475)
  • Page 11 INSTALLATION - 24v DC - RTS (375 / 475 SERIES) 2. Install wall bracket/end cap assembly with the supplied screws for Ceiling Mount for Wall Mount Motor Idler side side Use 5/16” magnetic driver (incl.) 3. Measure bracket to bracket width and verify it matches the ordered width. Adjust accordingly. Brackets must be level before the shade is installed! Installation - Nano Roll - 24v DC - RTS (375 / 475)
  • Page 12 INSTALLATION - 24v DC - RTS (375 / 475 SERIES) 4. Remove both end caps 1/16” hex tool Motor End cap Idler End cap Installation - Nano Roll - 24v DC - RTS (375 / 475)
  • Page 13 INSTALLATION - 24v DC - RTS (375 / 475 SERIES) 5. Connect shade and pre-wire, snap connector into spring clip. 6. Align and insert the motor side. Installation - Nano Roll - 24v DC - RTS (375 / 475)
  • Page 14 INSTALLATION - 24v DC - RTS (375 / 475 SERIES) 7. Make sure the motor head bracket is fully seated. Secure with cotter pin. Installation - Nano Roll - 24v DC - RTS (375 / 475)
  • Page 15 INSTALLATION - 24v DC- RTS (375 / 475 SERIES) 8. Put idler end cap over idler and snap into place. There will be an audible click. Installation - Nano Roll - 24v DC - RTS (375 / 475)
  • Page 16 INSTALLATION - 24v DC - RTS (375 / 475 SERIES) 9. Replace and fasten motor end cap 1/16” Hex tool Installation - Nano Roll - 24v DC - RTS (375 / 475)
  • Page 17 PROGRAMMING - RTS PROGRAMMING STEPS (must follow in order) Warning: Do not Step 1: Fine tune lower limit attempt to use any Step 2: Assign shades to groups installation remote until all Step 3: Pair groups to control system (Mylink, LinkPro) the shades are installed.

  • Page 18: Troubleshooting

    TROUBLESHOOTING TROUBLESHOOTING - RTS Tech Support: 512.832.6939 Problem Possible Cause Action to Take For RTS When the battery of a wire free motor is low the user Shade won’t operate. Motor is not powered. is notified by a series of red led flashes visible on the left end cap.
  • Page 19 MOTOR SERIAL NO.S Please keep a note of all the Serial No.s on your shade motors. OR for larger shade orders, refer to your Sales Order document for the list. Room Shade 1 Shade 2 Shade 3 Shade 4 Shade 5 Shade 6 Room Shade 1...
  • Page 20 ® Screen Innovations 9715-B Burnet Rd, Suite 400 Austin, TX 78758 512.832.6939 www.screeninnovations.com 400029 v. 1.2 15 October 2019...

This manual is also suitable for:

Nano roll 375 seriesNano roll 475 series